ARMOPUR® DTM 113 MATTE
Two‑component matte acrylic‑polyurethane primer‑finish coating DTM (Direct-to-Metal) provides excellent anticorrosion and weather resistance. Cured with an aliphatic isocyanate, offering a universal solution for durable all‑in‑one coatings. Can be used as a standalone coating or as a finish layer for metal structures and ACE (agricultural, construction and earth‑moving) equipment.
Specific Feature
thick‑coat application
Product Chemistry
acrylic‑polyurethane
Color Options
colored according to ral, ncs and sample
Surface Type
steel
aluminum
galvanized steel
plastics (except PP and PE)
2K primers
Gloss Level
matte
- When applied in a two‑coat system, it can be used as a standalone coating;
- Zinc phosphate is used as the anticorrosion pigment;
- Excellent resistance to atmospheric exposure and wear;
- Suitable for use as a matte topcoat on epoxy and acrylic‑polyurethane systems exposed to atmospheric and/or chemical agents;
- Recommended for painting transportation, equipment, external surfaces of tanks, steel frames and other steel structures, and machinery equipment.
- Provides good adhesion to various plastics (except PE/PP).
- Solid content of the mixture: 47 ± 2% | *49 ± 2%.
- Solid content of the base: 55–75%.
- Mixture density: 1.1–1.2 kg/L.
- Base viscosity: >180 s (DIN4).
- Mixture viscosity: 65–85 s (DIN4).
- Mixture pot life: 4 h.
- Drying time for a dry film thickness of 50 µm:
- +10 °C:
- From dust: 30 min
- Recoat: 6 h
- Minimum intercoat drying: 15 min
- +23 °C:
- From dust: 20 min
- Recoat: 4 h
- Minimum intercoat drying: 5–7 min
- +35 °C:
- From dust: 10 min
- Recoat: 2 h
- Minimum intercoat drying: 5 min
- Thermal drying:
- +60 °C: 30 min
Full cure of the coating: 7 days under ambient drying.
Data are given at 65% relative humidity. Values may change with humidity variations.
* Version with ARMOPUR Hardener 61 | 63
