Epoxy barrier coating reinforced with iron slag (MIO). Provides reliable protection of metal surfaces as an intermediate barrier layer in multilayer systems.
Two‑component acrylic‑polyurethane anticorrosion primer‑finish coating, weather‑resistant, glossy.
Two-component acrylic‑polyurethane anticorrosion primer‑finish coating, weather‑resistant with a textured effect.
Two‑component matte acrylic‑polyurethane DTM coating provides durable anticorrosion and weather‑resistant protection of metal surfaces and chassis of commercial vehicles.
Corrosion‑protective primer‑finish coating, two‑component, glossy, acrylic‑polyurethane, weather‑resistant.
Two-component acrylic‑polyurethane finish with deep matte effect, cured with an aliphatic isocyanate, provides a smooth, scratch‑resistant surface with a gloss of 5–10 %.
Corrosion‑resistant primer‑finish coating, two‑component, semi‑gloss acrylic‑polyurethane, weather‑resistant.
Epoxy‑phenolic chemical‑resistant coating, ideally suited for tanks, pipelines and equipment that contacts fuel and industrial chemicals.
Two‑component epoxy primer‑finish coating with abrasion resistance, reinforced with glass flakes.
Two‑component epoxy putty with aluminum pigment, forming a protective coating in the color “Aluminum Grey”. It can be applied to partially prepared surfaces and exhibits high tolerance to insufficient surface preparation (remaining rust and old coatings). It is used for repair painting and in conditions where high‑quality surface preparation cannot be ensured. The aluminum pigment enhances the coating’s barrier properties and provides additional protection against moisture and corrosion.
Two‑component epoxy putty that permits painting on incompletely prepared surfaces. It is used for repair painting and in conditions where high‑quality surface preparation cannot be ensured.
Two‑component epoxy primer‑finish coating with abrasion resistance, reinforced with glass flakes.
Two‑component epoxy anticorrosion colorable coating DTM with a volume fraction of non‑volatile substances of 70 %.
Two‑component epoxy anticorrosion colorable coating DTM with a non‑volatile content of 70 %.
Fast-drying single-component alkyd semi-gloss primer‑finish coating with anti-corrosion and weather-resistant properties for reliable metal protection.
One-component alkyd-modified anticorrosion weather‑resistant primer‑finish coating.