Switch Language

ARMEPOX® DTM 249

ARMEPOX®

Coating based on phenolic epoxy resin (novolak) with very good adhesion and excellent chemical and high‑temperature resistance. Recommended use: as an internal coating in tanks, pipelines, railway wagons, etc. for crude oil, gasoline, diesel fuel, aviation fuel, hot water, vegetable oils and other chemicals.

Specific Feature
high chemical resistance
Product Chemistry
phenol‑epoxy
Color Options
light gray
Surface Type
steel
Gloss Level
semi‑gloss
Get a consultation
  • Excellent chemical resistance
  • Resistant to crude oil at temperatures up to 120°C
  • For some products, re‑commissioning is possible after 48 hours
  • Solid content of the mixture: 70 ± 2%.
  • Solid content of the base: 75–95%.
  • Mixture density: 1.45-1.55 kg/L.
  • Base viscosity: thixotropic.
  • Mixture viscosity: thixotropic.
  • Mixture pot life: 6 hours.
  • Drying time for a dry film thickness of 100 µm:
  • +10 °C:
    • "Touch dry": 1 hour
    • "Recoat": 6-8 hours
    • Minimum intercoat drying: 4 hours
  • +23 °C:
    • "Touch dry": 40 minutes
    • "Recoat": 5 hours
    • Minimum intercoat drying: 2 hours
  • +35 °C:
    • "Touch dry": 30 minutes
    • "Recoat": 3 hours
    • Minimum intercoat drying: 1 hour
  • Thermal drying:
    • +60 °C: 30 minutes

  • Full film formation: 7 days under natural drying.

    Data are given at 65 % relative humidity. Values may change with humidity variations.